since i can't test these things myself, i'll need your help, if you care to solve this problem
http://www.ps.ic.ac.uk/~umeca74/ed3.zip
this special build uses some extra language dependent settings. Please use DBMON (as explained in xplorer2) to see what messages it prints when it starts, especially dwLANGOPTIONS, dwEDITSTYLE, and dwTEXTMODE
then I will recommend some new values you can put in the registry to change them, and lets hope we'll find the perfect combination!
editor mixes fonts
Moderators: fgagnon, nikos, Site Mods
these numbers mean:
LANGOPTIONS = IMF_AUTOFONT + IMF_DUALFONT
EDITSTYLE = (nothing special)
TEXTMODE = TM_RICHTEXT + TM_MULTILEVELUNDO + TM_MULTICODEPAGE
I hope you are familiar with registry editing.
Under HKCU\Software\ZabaraKatranemia Plc\Editor2 you'll find entries for all these special values, called dwLANGOPTIONS etc. We'll try to change them so as to correct the problems you experience
my prime suspect would be LANGOPTIONS. So let's try that first. Available options are:
IMF_AUTOKEYBOARD 0x0001
IMF_AUTOFONT 0x0002
IMF_IMECANCELCOMPLETE 0x0004
IMF_IMEALWAYSSENDNOTIFY 0x0008
IMF_AUTOFONTSIZEADJUST 0x0010
IMF_UIFONTS 0x0020
IMF_DUALFONT 0x0080
the problems you described are spot on with the names of the options. So try setting dwLANGOPTIONS to 0 (zero) to turn them both off. You'll have to quit ed2 before you can change the registry. Then run it again and see if things are improved.
Then we'll have to hope that these corrections don't cause any other problems... but those are the joys of windows programming
LANGOPTIONS = IMF_AUTOFONT + IMF_DUALFONT
EDITSTYLE = (nothing special)
TEXTMODE = TM_RICHTEXT + TM_MULTILEVELUNDO + TM_MULTICODEPAGE
I hope you are familiar with registry editing.
Under HKCU\Software\ZabaraKatranemia Plc\Editor2 you'll find entries for all these special values, called dwLANGOPTIONS etc. We'll try to change them so as to correct the problems you experience
my prime suspect would be LANGOPTIONS. So let's try that first. Available options are:
IMF_AUTOKEYBOARD 0x0001
IMF_AUTOFONT 0x0002
IMF_IMECANCELCOMPLETE 0x0004
IMF_IMEALWAYSSENDNOTIFY 0x0008
IMF_AUTOFONTSIZEADJUST 0x0010
IMF_UIFONTS 0x0020
IMF_DUALFONT 0x0080
the problems you described are spot on with the names of the options. So try setting dwLANGOPTIONS to 0 (zero) to turn them both off. You'll have to quit ed2 before you can change the registry. Then run it again and see if things are improved.
Then we'll have to hope that these corrections don't cause any other problems... but those are the joys of windows programming