Writing to a CD
Moderators: fgagnon, nikos, Site Mods
Writing to a CD
Is it possible to write a file to a CD using 2xExplorer?
Whenever I enter CTRL-F5 to copy a file to a CD, I see the error message "Cannot copy xxxx(Filename):Files on this CD are read-only. You can still copy new files to this writable CD, which will replace files already on the disc."
If it is possible, how do I do it?
Whenever I enter CTRL-F5 to copy a file to a CD, I see the error message "Cannot copy xxxx(Filename):Files on this CD are read-only. You can still copy new files to this writable CD, which will replace files already on the disc."
If it is possible, how do I do it?
Narayan,
I tried the drag-n-drop method to copy to the CD Drive, but I saw the same error message as before.
I don't have a drop-target in the system tray. To what packet-writing application are you reffering?
I don't have DirectCD installed. The only two applications I've used for CD writing are the ones included with my computer's software, Roxio's CD Writing Wizard built into Windows XP, and HP's RecordNow.
I've been trying out PowerDesk also, and if you use the Copy command or drag-n-drop to the CD Drive, the files go to the CD Burning folder (staging area), waiting to be written to the CD.
Maybe 2xExplorer should work that way also.
Zippit,
What you suggest does sound like a better way to go. I just might start doing it that way.
I take it Nero is commercial software?
I tried the drag-n-drop method to copy to the CD Drive, but I saw the same error message as before.
I don't have a drop-target in the system tray. To what packet-writing application are you reffering?
I don't have DirectCD installed. The only two applications I've used for CD writing are the ones included with my computer's software, Roxio's CD Writing Wizard built into Windows XP, and HP's RecordNow.
I've been trying out PowerDesk also, and if you use the Copy command or drag-n-drop to the CD Drive, the files go to the CD Burning folder (staging area), waiting to be written to the CD.
Maybe 2xExplorer should work that way also.
Zippit,
What you suggest does sound like a better way to go. I just might start doing it that way.
I take it Nero is commercial software?
A packet-writing application allows you to treat a CD like a floppy (like zippit mentioned). See http://www.willowsoft.com/backup/tech_p ... iting.html
This is a nice alternative to writing an entire CD at one go, as the main CD writer programs (Roxio and Nero, etc) do..Both Roxio and Nero (yes, they are commercial software) have a packet-writing application built in with their standard CD-writer applications.
You have to format the CD first, before packet-writing on it. Unformatted CDs won't work.
Then you can display the contents of this CD in one of the folder panes and use drag-n-drop to copy/move items to it. As soon as you drop the items into CD, they are written on it: there is no "stage" (if I have understood you correctly, what you have is a sort of "catchment" area that only holds the dropped items; but you have to burn them onto CD using a wizard).
There is another mechanism too, which allows you to use these applications without cluttering your screen: they have a catcher window in/near your System Tray. This little window stays on top. So you can drop anything in them and burn it on the CD.
The (hidden) penalty to be paid is each time you add a new load to such a formatted CD, you lose a few MBs on the CD (which goes towards maintaining addresses).
Now I am not a CD-writer Guru, so I can't talk authoritatively about these applications, but your HP application could have a packet-writing part.
Before investing in Nero/Roxio, please check!
In fact, I think your application is a packet-writing type; because it is rejecting the CD-R (either it is indirectly asking for a CD-RW; or it is pointing at the fact that your CD is not properly formatted for the packet-writing).
Is this the first time you are using the CD-writer in that mode; or could you do it before, but are having this problem only recently (especially with x2)?
This is a nice alternative to writing an entire CD at one go, as the main CD writer programs (Roxio and Nero, etc) do..Both Roxio and Nero (yes, they are commercial software) have a packet-writing application built in with their standard CD-writer applications.
You have to format the CD first, before packet-writing on it. Unformatted CDs won't work.
Then you can display the contents of this CD in one of the folder panes and use drag-n-drop to copy/move items to it. As soon as you drop the items into CD, they are written on it: there is no "stage" (if I have understood you correctly, what you have is a sort of "catchment" area that only holds the dropped items; but you have to burn them onto CD using a wizard).
There is another mechanism too, which allows you to use these applications without cluttering your screen: they have a catcher window in/near your System Tray. This little window stays on top. So you can drop anything in them and burn it on the CD.
The (hidden) penalty to be paid is each time you add a new load to such a formatted CD, you lose a few MBs on the CD (which goes towards maintaining addresses).
Now I am not a CD-writer Guru, so I can't talk authoritatively about these applications, but your HP application could have a packet-writing part.
Before investing in Nero/Roxio, please check!
In fact, I think your application is a packet-writing type; because it is rejecting the CD-R (either it is indirectly asking for a CD-RW; or it is pointing at the fact that your CD is not properly formatted for the packet-writing).
Is this the first time you are using the CD-writer in that mode; or could you do it before, but are having this problem only recently (especially with x2)?
what you describe as a packet writer sounds like what directCD does. The problem with directCD is that it isn't a well established standard. You burn something on one machine and can't read it on another. Something you burned 3 years ago on a previous windows OS is likely to fail too.
i don't do much burning myself either
i don't do much burning myself either
Narayan,
2xExplorer's rejecting of the CD-R wasn't because I was using HP's RecordNow at the time. I haven't used HP's RecordNow in many months. I may try it again soon to see if it features packet-writing.
You may have misunderstood my original post. I thought that 2xExplorer either had its own method of writing to a CD (very unlikely, I knew), or that it would copy selected files to the CD Burning folder if the CD Drive was the destination folder (the method used by PowerDesk).
If files were copied to the CD Burning folder, I thought there might be a way to invoke Roxio'S CD Writing Wizard without leaving 2xExplorer (possibly using the Command Line).
I know I expect too much, but I like to do everything from the same application.
2xExplorer's rejecting of the CD-R wasn't because I was using HP's RecordNow at the time. I haven't used HP's RecordNow in many months. I may try it again soon to see if it features packet-writing.
You may have misunderstood my original post. I thought that 2xExplorer either had its own method of writing to a CD (very unlikely, I knew), or that it would copy selected files to the CD Burning folder if the CD Drive was the destination folder (the method used by PowerDesk).
If files were copied to the CD Burning folder, I thought there might be a way to invoke Roxio'S CD Writing Wizard without leaving 2xExplorer (possibly using the Command Line).
I know I expect too much, but I like to do everything from the same application.
In fact my point was that x2 is not at the root of all the rejections: apparently, it simply passes on the error message generated by some other application.
So you have to find out exactly which application is generating that error message.
So far as sending all files straight to "CD burning folder" is concerned, nothing could be simpler: Use the F5/F6 dialog box to specify your destination folder; and use that each time. Then onwards use ALT+F5 (or ALT+F6).
@Commandline- over to our resident expert, JRz!
So you have to find out exactly which application is generating that error message.
So far as sending all files straight to "CD burning folder" is concerned, nothing could be simpler: Use the F5/F6 dialog box to specify your destination folder; and use that each time. Then onwards use ALT+F5 (or ALT+F6).
@Commandline- over to our resident expert, JRz!
Of course not,It was only meant as an alternate personal computer file storage medium,till it's full,instead of 400 floppys,in case of a hd crash.nikos wrote:what you describe as a packet writer sounds like what directCD does. The problem with directCD is that it isn't a well established standard. You burn something on one machine and can't read it on another. Something you burned 3 years ago on a previous windows OS is likely to fail too.
i don't do much burning myself either
Please let me know if you need more on this.
p.s.I can still read my 1990 Atari floppys.
War is Hell
Lest We Forget.
Lest We Forget.
formating
Atari was nice enough to allow ibm formating.I redid all mine before i went PC.I wish i could use my iff animation though.Need emulator.nikos wrote:i wish i could read my Amiga floppies!
War is Hell
Lest We Forget.
Lest We Forget.